Description
Alpha A/T Simpson Recovery Point
Off-road and expedition vehicles are going to use recovery gear. Period. And you’re going to need a place to safely and securely attach that recovery gear. With that in mind we designed our Alpha A/T Simpson Recovery Point. These mounts (single or dual options) provide strong, secure and safe mounting points for standard 3/4” recovery shackles.When you stop and look at the forces involved in your standard off-road recovery scenario you quickly realize that this is one area where things can get dangerous very quickly if parts fail. Our 1 1/8” thick Simpson Recovery Points are rated at 25,000 lbs (minimum breaking strength) and are CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight and rust proof performance. For severe duty applications you can also outfit the Alpha A/T with single or dual Rotator Shackle Mounts (45,000 lb minimum breaking strength).
Maximum Clearance + Maximum Access
Most shackle mounts present a problem when not being used in the fact that they must, by design, protrude from the body of the front-end system. This presents large snag point for obstacles (logs, rocks, etc.) you may be trying to drive or skid over. This is made worse on many bumper systems by the fact that the shackle mounts are positioned low or even underneath the bumper, providing even more snag interference.A low or under-bumper position of a shackle mount also makes access to the shackle mount even more difficult when the vehicle is in deep mud, sand or snow. In this case you will find yourself having to dig for your shackle mount just to attached the recovery strap. This can also be a problem in steep approach angle scenarios where you front bumper may be jammed against the opposite face of a deep ravine. In this case getting to a low mounted shackle mount will be extremely difficult.
The Alpha A/T Simpson Recovery Points are positioned above the bumper body which eliminates snag interference in technical driving scenarios. This high position also provides easy shackle access in all but the worst deep mud, sand or snow recoveries. This high mounting position also greatly reduces than chance of a trapped or pinned shackle in steep approach angle scenarios.
Alpha A/T models (except C1 and C1-S models) come standard with a single Simpson Recovery Point and second Simpson Recovery Point can be added if desired (C1 and C1-S models use Recovery Hooks and optional Rotator Shackle Mounts). The Standard Shackle Mount can be mounted on either the left or right upper assembly or both sides if dual mounts are required (see photos above).
The Alpha A/T Dual Simpson Recovery Points are 2-stage powder coated and available in matte black or recovery yellow. Fasteners are grade 8.8 and OE-grade triple coated for maximum corrosion protection (1000+ hr salt spray test).
Features- High-Strength / Lightweight / No Rust Performance
- CNC 6061-T6 Aluminum Construction
- 25,000 lb Capacity (Minimum Breaking Strength)
- High-Mount, High-Clearance Design
- Accepts Most 3/4” Recovery Shackles
- Left & Right Mounting Locations
- 2-Stage Powder Coating – Black or Yellow
- Triple Coated Grade 8.8 Fasteners
- US-Made
- Not for C1 and C1-S Models (see Recovery Hooks)
Service Applications and Limitations
The Alpha A/T Simpson Recovery Point is designed for use in medium to heavy-duty recovery applications where proper recovery techniques are used. Extreme angle recoveries (far left or right of the vehicle centerline) place extreme loads on rigid recovery mounting points and can cause component failures. Recovery shackles are not designed for extreme side loading and their strength is reduced dramatically in such scenarios (see shackle manufacturer websites for details). For severe duty and extreme side loading applications see our Rotator Shackle Mounts.Materials
The Alpha A/T Dual Simpson Recovery Points are constructed from CNC machined 6061-T6 aluminum billet. This rust-proof, high-strength, lightweight material provides excellent strength and performance. In addition, the aluminum construction provides a rust-proof structure, which is critical for long term durability for a component designed to endure frequent impacts and abrasions that will damage and remove protective coatings.Corrosion and Coatings
Our all aluminum design requires no coating to withstand rust and we could ship them uncoated without issue. However, we provide a 2-stage powder coating to match the Alpha A/T. We offer the Dual Simpson Recovery Points in both matte black (to match Alpha A/T) or recovery yellow. Powder coating will be chipped and scratched in the off-road environment. This cosmetic damage can be touched up with paint or left untreated as desired.Fasteners
To ensure high-strength performance we use all grade 8.8 fasteners on the Alpha A/T Dual Standard Shackle Mounts. These are treated with a 3-stage OE-grade coating for maximum corrosion protection (1,000+ hr salt spray test certification).Models- Does not fit C1 and C1-S configurations
Materials
- 6061-T6 Aluminum
- CNC Machined
Powder Coating and Protection
- Corrosion Resistant Aluminum Construction
- 2-Stage Powder Coating
- Triple Coated Grade 8.8 Fasteners
Vehicles
- 2007+ Jeep JK Wrangler (w/ Alpha A/T Jeep Wrangler)
- 2005-2015 Toyota Tacoma (w/ Alpha A/T Toyota Tacoma)