Splash Guard

Splash Guards

$65.00

Mud, water, rocks and debris. Exposure to these elements is the preferred life of the off-road and expedition vehicle. However, mud, rocks and debris can easily turn into an airborne hazard when thrown by aggressive mud and all-terrain tires. Our Alpha A/T Splash Guards (2 per set) are designed to address one half of this problem by acting as an “upper mud flap” for the top of the Alpha A/T.

  • Reduces Damage Caused by Rocks, Mud, and Debris Thrown From Tires
  • Light Weight / High-Strength
  • 6061-T6 Aluminum Construction
  • 2-Stage Powder Coating
  • Triple-Coated Grade 8.8 Fasteners
  • Bolt-On Installation
  • Includes 2 Splash Guards
Please allow 1-5 weeks for manufacturing.
Clear selection
SKU: MFES-JK-0010A. Category: .

Product Description


  • Alpha A/T Splash Guards
    Mud, water, rocks and debris. Exposure to these elements is the preferred life of the off-road and expedition vehicle. However, mud, rocks and debris can easily turn into an airborne hazard when thrown by aggressive mud and all-terrain tires.

    Our Alpha A/T Splash Guards (2 per set) are designed to address one half of this problem by acting as an “upper mud flap” for the top of the Alpha A/T. These guards sharply reduce the amount of mud, water, rocks, and debris being thrown forward from your tires by filling the gap between the outer section of the Alpha A/T and the factory Jeep and Tacoma fenders. They have been tested and designed to provide a balance between performance and protection without the addition of unneeded material.

    The Alpha A/T Splash Guards are laser cut and CNC bent from 3/16” 6061-T6 aluminum for high-strength impact resistance and rust-proof durability. They are 2-stage powder coated in matte black to match the Alpha A/T. Fasteners are grade 8.8 and OE-grade triple coated for maximum corrosion protection (1000+ hr salt spray test).

    Designed for use with the Alpha A/T system, will not work with factory or other aftermarket bumpers.

    Features

    • Rust-Proof, Impact Resistant Design
    • 6061-T6 Aluminum Construction
    • Laser Cut and CNC Bent
    • 2-Stage Powder Coating
    • Triple Coated Grade 8.8 Fasteners
    • US-Made
    • 2 Splash Guards Per Set, Includes All Fasteners

    Made in USA



  • Materials
    The Alpha A/T Splash Guards are constructed from laser cut, CNC bent, 3/16” thick 6061-T6 aluminum plate. This rust-proof, high-strength, lightweight material provides excellent strength and impact resistance. In addition, the aluminum construction provides a rust-proof structure, which is critical for long term durability in a component designed to endure frequent rock and debris strikes that will damage and remove protective coatings.

    Corrosion and Coatings
    Our all aluminum design doesn’t need a coating to withstand rust and we could ship them uncoated without issue. However, we provide a 2-stage powder coating to match the Alpha A/T. Powder coating can be damaged in the off-road environment. These chips and scratches can be touched up with paint or left untreated as desired.

    Fasteners
    To ensure high-strength performance we use all grade 8.8 fasteners on the Alpha A/T Splash Guards. These are treated with a 3-stage OE-grade coating for maximum corrosion protection (1,000+ hr salt spray test certification).

    Materials

    • 3/16” 6061-T6 Aluminum
    • Laser Cut and CNC Bent

    Powder Coating and Protection

    • Corrosion Resistant Aluminum Construction
    • 2-Stage Powder Coating
    • Triple Coated Grade 8.8 Fasteners

    Vehicle

    • 2007+ Jeep JK Wrangler (w/ Alpha A/T Jeep Wrangler)
    • 2005-2015 Toyota Tacoma (w/ Alpha A/T Toyota Tacoma)

    Made in USA


Additional Information

Weight 3 lbs
Dimensions 11 x 3 x 3 in
Vehicle Type

Jeep JK, Toyota Tacoma